Logo

MOXA AWK-6232

SPHINX in Europe »  ch es de it at dk fr  «
Phone: +49 (0) 6201 75437 |  Legal Notice |  Contact |  German version
     

You are here » MOXA AWK-6232 «

MOXA AWK-6232

prodgraf


Industrial IEEE 802.11n IP68 Dual-Radio Wireless AP/Bridge/Client



Properties


Description

Moxa’s AWK-6232 3-in-1 outdoor wireless AP/bridge/client meets the growing need for faster data transmission speeds and wider coverage by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps per each radio module. The AWK-6232 provides a flexible and efficient way to deploy your wireless network with its dual 2.4/5 GHz RF modules, which allow two independent wireless connections over different frequencies. The AWK-6232 is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. In addition, the AWK-6232 is housed in an IP68 metal casing with M12 connectors for total protection against dust, water, vibration, and other environmental effects.

Improved Higher Data Rate and Bandwidth

Features for Critical Environments






ProdGrafik

Further Information


WLAN Interface

Standards
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power-over-Ethernet Plus
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN

Spread Spectrum and Modulation (typical)
Operating Channels (central frequency)
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)

Security
Transmission Rates
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)

TX Transmit Power
802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)

TX Transmit Power MIMO (per connector)
802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)

RX Sensitivity
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps

RX Sensitivity MIMO
802.11a/n:
-68 dBm @ MCS15 40 MHz, -70 dBm @ MCS7 40 MHz, -69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz


Protocol Support

General Protocols
Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP

AP-only Protocols
ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)


Interface

Default Antennas
4 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male)

Connector for External Antennas
N-type (female)

M12 Ports
2, 10/100/1000BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (female)

Console Port
RS-232 (waterproof RJ45-type)

Reset
Present

LED Indicators
PWR, FAULT, STATE, WLAN1, WLAN2, LAN1, LAN2

Alarm Contact (digital output, M12 connector)
1 relay output with current carrying capacity of 1 A @ 24 VDC

Digital Inputs (M12 connector, male)
2 electrically isolated inputs

Physical Characteristics

Housing
Metal, IP68 protection

Weight
1.8 kg

Dimensions
224 x 148 x 67 mm (8.82 x 5.82 x 2.62 in)

Installation
Wall mounting (standard), DIN-Rail mounting (optional), pole mounting (optional)


Environmental Limits

Operating Temperature -40 to 75°C (-40 to 167°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5% to 100% (non-condensing)


Power Requirements

Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet plus (IEEE 802.3at compliant) Connector M12 male connector with A-coding Power Consumption 12 to 48 VDC, 1.5 A (max.) Reverse Polarity Protection Present


Standards and Certifications

Safety UL 60950-1, EN 60950-1 EMC EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024 Radio EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN001




Ordering Information


AWK-6232-M12-EU-T


PDF

PDF description MOXA AWK-6232 Datasheet (879.2 kB)

plus   

Find more products in this groups



Copyright © 2013 SPHINX Computer Vertriebs GmbH

TermsUp ContactCookie DirectiveLocationsAbout us