MOXA PT-G503-PHR-PTP

SPHINX in Europe
DE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > Ethernet Switches > MOXA PT-G503-PHR-PTP

MOXA PT-G503-PHR-PTP

IEC 61850-3/62439-3 3-port full Gigabit managed redundancy boxes

MOXA PT-G503-PHR-PTP
4453_12271.png
4453_9741.png
4453_12272.jpg
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • IEC 61850-3, IEEE 1613 (power substations) compliant
  • IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
  • PRP/HSR Coupling and QuadBox functions supported
  • Ethernet console reserved for local access ››Built-in MMS server, based on IEC 61850-90-4 switch modeling for power SCADA
  • Hardware-based IEEE 1588v2 PTP supported
  • Design ready for NERC CIP compliance system development
  • Isolated redundant power inputs with universal 24/48 VDC or 110/220 VDC/VAC power supply range
  • -40 to 85°C operating temperature range

The PT-G503-PHR-PTP series redundancy boxes (RedBoxes) are compliant with the latest standardized redundancy protocols for industrial automation networks, IEC 62439-3 Clause 4 (Parallel Redundancy Protocol, PRP) and IEC 62439-3 Clause 5 (High-availability Seamless Redundancy, HSR). PRP/HSR ensures the highest system availability and data integrity for mission-critical applications in electrical substation and/or process automation systems that require zero recovery time redundancy. The redundant protocols Coupling and QuadBox are also supported. With Coupling and QuadBox, HSR rings can be connected to make the redundant network more versatile. The PT-G503-PHR-PTP series comes with three 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports.

One slot (INTERLINK port) is for an internal link for connecting with a SAN (Singly Attached Node). The other two ports (LAN A and LAN B ports) are for PRP/HSR redundant protocol communications. With this full Gigabit Ethernet port design, the PT-G503-PHR-PTP series provides high performance for PRP/HSR systems.

The PT-G503-PHR-PTP series also provides hardware-based IEEE 1588v2 PTP when in end-to-end one-step transparent clock mode for timing-critical applications and isolated redundant power inputs with 24/48 VDC or 110/220 VDC/VAC power supply ranges to increase the reliability of the power supply.

ProdGrafik

Technology

    Standards
    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X) and 100BaseFX
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3z for 1000BaseX


Software Features

    Management
    IPv4/IPv6, PRP/HSR, SNMPv1/v2c/v3, DHCP Client, BootP, SMTP, RARP, HTTP, Telnet, LLDP, Flow Control, Back Pressure Flow Control, SNMP Inform, Port Mirror, Fiber Check, Syslog, RMON

    Filter
    Multicast Filter Behavior

    Redundancy Protocols
    PRP/HSR, RSTP Transparent

    Security
    RADIUS, TACACS+, Trusted Access Control, Authentication Certificate (SSL Certificate, SSH Key Regenerate)

    Time Management
    SNTP, NTP Server/Client, IEEE 1588v2 PTP

    Industrial Protocols
    Modbus/TCP

    MIB
    IEC 62439-3 MIB

    Power Substation
    MMS


Interface

    Gigabit Ethernet
    3 x 10/100/1000BaseT(X) ports or 100/1000BaseSFP combo ports

    Console Port
    Ethernet console (10/100/1000 Mbps RJ45), USB-serial console (Type B connector)

    Storage Port
    USB storage (Type A connector for ABC-02-USB)

    Alarm Contact 1 relay output with current carrying capacity of 1 A @ 24 VDC

    Digital Inputs
    1 input with the same ground, but electrically isolated from the electronics
    • +13 to +30 V for state “1”
    • -30 to +3 V for state “0”
    • Max. input current: 8 mA


Power Requirements

    Input Voltage
    • WV: 24/48 VDC
    • HV: 110/220 VDC/VAC

    Operating Voltage
    • WV: 18 to 72 VDC
    • HV: 88 to 300 VDC, 85 to 264 VAC

    Input Current
    • Max. 0.660/0.360 A @ 24/48 VDC
    • Max. 0.150/0.080 A @ 110/220 VDC
    • Max. 0.260/0.170 A @ 110/220 VAC

    Overload Current Protection
    Present

    Connection
    5-pin terminal block

    Reverse Polarity Protection
    Present


Physical Characteristics

    Housing
    Aluminum alloy

    IP Rating
    IP40 protection

    Dimensions
    80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)

    Weight
    1210 g (2.69 lb)

    Installation
    DIN-rail mounting


Environmental Limits

    Operating Temperature
    -40 to 85°C (-40 to 185°F)

    Storage Temperature
    -40 to 85°C (-40 to 185°F)

    Ambient Relative Humidity
    5 to 95% (non-condensing)


Standards and Certifications

    High Availability Automation Networks
    IEC 62439-3

    Safety
    UL 508

    EMI
    FCC Part 15 Subpart B Class A, EN 55022 Class A

    EMS
    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8
    IEC 61000-4-11

    Rail Traffic
    EN 50121-4

    Electrical Substation
    IEC 61850-3, IEEE 1613


MTBF (mean time between failures)

    Time
    PT-G503-PHR-PTP-WV:440,857 hrs
    PT-G503-PHR-PTP-HV:566,844 hrs

    Standard
    Telcordia TR/SR



Ordering Information

           Available Modules
PT-G503-PHR-PTP-WV IEC 61850-3 and IEC 62439-3 full Gigabit managed redundancy box,
with 3 10/100/1000BaseT(X) ports or 100/1000Base SFP ports,
1 10/100/1000BaseT(X) Ethernet console port,
1 isolated dual power supply(24/48 VDC),
-40 to 85°C operating temperature
PT-G503-PHR-PTP-HV IEC 61850-3 and IEC 62439-3 full Gigabit managed redundancy box,
with 3 10/100/1000BaseT(X) ports or 100/1000Base SFP ports,
1 10/100/1000BaseT(X) Ethernet console port,
1 isolated dual power supply(88 to 300 VDC or 85 to 264 VAC),
-40 to 85°C operating temperature



Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.