Terz NITE-TX1XS
Unmanaged Industrial Ethernet Switches M12 IP65/67
Fast Ethernet, Single Pair Ethernet & Gigabit Ethernet
- Flexible use with 24 VDC
- IEEE 802.3bw (100Base-T1)
- Ultra-compact, ruggedized design
- 8x D-coded T1|TX Auto-Detection
- Temperature range -40 to +70°C
- DIN EN 50155 rail compliant
- Polarity protection
- Gigabit Uplink Ports
The NITE-TX1XS82 is a Cross-Technology Switch that combines two Ethernet technologies on eight D-coded M12 ports: Standard Ethernet and Single Pair Ethernet. These T1|TX Data-Hybrid ports allow for the flexible networking of all Ethernet participants. Through the T1|TX Auto-Detection mode, Standard Ethernet and Single Pair Ethernet devices can be connected, regardless of whether they are MASTER or SLAVE devices. The switch features two X-coded M12 Gigabit ports through which data is forwarded with high bandwidth. One of the two uplink ports provides a bandwidth of 2.5 Gbit/s according to the IEEE 2.5GBase-T standard. The Plug&Play switches enable reliable Ethernet communication directly in the application, thus saving space in the control cabinet and reducing wiring effort.
Specifications
General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
1,522 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes
Energy Efficient Ethernet:
No
Flow Control:
Yes
PROFINET suitable:
Yes
Port count (X-cod. + D-cod.) | 2+8 |
MTBF (SN 29500, Mio. h) | 2.223 |
Frame Forwarding (Art.-No.) | xxxxx0 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding |
Power supply / electronics
- Nominal voltage:
Vin 24 VDC
Permitted voltage range:
9 to 36 VDC
Connection type:
Vin M12 A-cod. (Pin1,2+|Pin3,4-) | M4 (FE)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Redundant power supply:
No
Inrush current limiter:
No
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC/VDC
Polarity protection:
Yes
Power failure bridging:
5 ms
PCB Conformal Coating:
Yes
Protection category:
III
Isolation:
1.5 kVDC Vin ⟺ Ethernet Ports | 2 kVDC Vin ⟺ housing
Port count (X-cod. + D-cod.) | 2+8 |
Power consumption (W) Idle | full load |
0,72 | 2,9 |
Input current (mA) Idle | full load |
30 | 120 |
Mechanical properties
- Housing material:
Nickel-plated aluminium, stainless steel
Mounting:
M6 hole for wall mounting, round head screw
IP Protection class (operation):
IP65/67
Port count (M12) | 2+8 |
Width (mm) | 65 |
Height (mm) | 180 |
Depth (mm) | 29,8 |
Weight (g) | 470 |
Ethernet interface 1 (T1|TX Auto-Detection)
- IEEE Standards:
802.3 10BaseT, 100BaseT(x)
Isolation:
1 kVDC Eth. Port ⟺ housing | 2 kVDC Port ⟺ Port
Connection type:
M12 D-coded
Port count | Speed:
8 | 10/100 Mbit/s TX & 100 Mbit/s T1
Cable length:
TX 100 m (Twisted Pair, 0,14 mm² - 0,22 mm², Cat 5) T1 15+ m (Twisted Pair)
Ethernet Interfaces 2
- IEEE Standards:
802.3 100BaseT(X), 1000BaseT, 2.5BaseT
Isolation:
1 kVDC Eth. Port ⟺ housing | 2 kVDC Port ⟺ Port
Connection type:
M12 X-coded
Ports | Speed:
1 | 100/1000 Mbit/s + 1 | 100/1000/2500 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
EMC and environmental specifications
- Operating temperature:
-40°C to +70°C
Storage temperature:
-40°C to +85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Fire protection:
DIN EN 45545
Approvals and certifications
- CE, DIN EN 50155, DIN EN 60950-1, ITxPT
Status and diagnostic indicators
- LED:
Power | Link/Activity/Speed per Port
Ordering Information
Article | Art.-No. | Specification |
---|---|---|
NITE-TX1XS82-3100 | 4314200 | 8xM12 FE+2xM12 GE |